ProAc Response D48 Speakers
The Response D48 is one of the best designs from ProAc and should please all audio files regardless of their taste in music.
Areas of improvement have been mid-range detail and a cleaner, faster
and more extended bass response.
Another achievement for the D48 is its ability to create large orchestral works as well as heavy rock music.
A new studio monitor quality bass driver was designed for the D48. It features a special impregnated cone and mid frequencies are tuned by a cap of greater size than standard. This gives the new unit greater mid-range detail along with excellent bass control giving a tighter and more extended response.
The two new bass drivers are each loaded through our special floor loading with side vents, this makes the loudspeaker easier to sight and reacts less to surroundings. The two bass units are then seamlessly mated to our ribbon or dome tweeter depending on your preference. With such a large slim floor standing design the sound stage is superb being very large and with pinpoint imagery.
The D48 has a high quality filter network designed by Stewart Tyler comprising of the finest components, ProAc cable on a special board. The filter is also split for bi-amping and bi-wiring.
Another achievement for the D48 is its ability to create large orchestral works as well as heavy rock music.
A new studio monitor quality bass driver was designed for the D48. It features a special impregnated cone and mid frequencies are tuned by a cap of greater size than standard. This gives the new unit greater mid-range detail along with excellent bass control giving a tighter and more extended response.
The two new bass drivers are each loaded through our special floor loading with side vents, this makes the loudspeaker easier to sight and reacts less to surroundings. The two bass units are then seamlessly mated to our ribbon or dome tweeter depending on your preference. With such a large slim floor standing design the sound stage is superb being very large and with pinpoint imagery.
The D48 has a high quality filter network designed by Stewart Tyler comprising of the finest components, ProAc cable on a special board. The filter is also split for bi-amping and bi-wiring.
ProAc Response D48 in Maple finish
ProAc Response D48 in Ebony finish
|
ProAc Response D48 Specifications:
Nominal Impedance 4 ohms Recommended Amplifiers 10 to 250 watts Frequency Response 20Hz to 30kHz Sensitivity 90 db linear for 1 watt at 1 metre Cabinet Heavy, inert construction damped with special material and featuring side venting for improved bass loading. Bass/Midrange 2 x 6 1/2 inch (165mm) ProAc unit studio monitor design with special coating and dust cap tuning. Tweeter Tweeter D48R - ProAc ribbon 60mm x 10mm 'light as a human hair' with rear chamber damping. Tweeter D48 - ProAc 1 inch (25 mm) soft dome with special surround and inner damping. Crossover HQC using dedicated components wired throughout with ProAc multistrand oxygen-free copper cable. Split for optional bi-wiring/bi-amping. Dimensions 47 1/4 inch (1200mm) high on plinths with spikes 8 1/3 inch (212mm) wide 13 1/2 inch (340mm) deep Weight 86 lbs (39 Kgs) each Mode Floorstanding Grille Acoustically transparent crimplene Finish Standard Finishes: Black Ash, Mahogany, Cherry, Maple. Premium Finishes: Rosewood, Ebony. |
ProAc Response D48 Reviews:
"...The ProAc Response D48 speakers deliver a deep beautifully controlled bass response, a fast electrostatic midrange with a sweet and detailed high frequency.. ....."
"...The ProAc Response D48 speakers deliver a deep beautifully controlled bass response, a fast electrostatic midrange with a sweet and detailed high frequency.. ....."
